Studio Update: Geek Out Studio is Growing

This past few months have been incredibly busy around here. I promise you I haven’t stopped. I’ve just been spread pretty thin. However, I will show you things that have been keeping my attention. There’s going to be a lot of pictures and a lot of things I gloss over. You can keep more up to date by following Geek Out Studio’s Facebook page, Twitter feed @GeekOutStudio, or Instagram.

I’ve still been working on various miniatures; however, I haven’t taken any studio shots because the clients have all decided to do their own bases. I haven’t had a chance to meet up with them and take some studio shots of the fully completed miniatures, but I’ll go over some of the work-in-progress pictures.

After I finished the Heldrake, I got started on a couple of costume commissions that were sent in. Both were for Kill La Kill props. The first being Ryuko’s Scissor Blade.

Scissor BladeHere’s what it looked like in some photo shoots .

Kill La Kill CosplayI also got a request for Sasuki’s Bakuzan. This took a little more time, and I’m still trying to figure out how to do the sheath.

BakuzanHere’s the two props in a nice photo shoot from this year’s Mechacon in New Orleans.

Kill La Kill GroupBack to the miniature side of things. There have been three projects that have come across my desk that I’m still working on as more pieces come in. The first was a collection of Bolt Action Marines.

Bolt Action MarinesThis project was a bit time-consuming since I basically had to hand paint all the marines, but they turned out good.

Bolt Action BARBolt Action NCOBolt Action SniperI should be able to get some nice showcase photos of these guys soon, so keep an eye out for them.

I still work on Warhammer stuff (I promise); however, I have gotten to work on a Warhammer Fantasy piece.

OrionThe Wood Elves Orion. This was an interesting piece to work on manly due to the fact that the client wanted it mostly done in fall colors. It was another time-consuming piece because again, I had to hand paint most of it.

Orion BackThis is another piece that I should be able to get some showcase photos of soon.

Grey Hunter FrontWe’re back to 40k Space Marines. This and one other miniature was done as a test model for a client that wanted a white color scheme Space Wolves army.

Grey Hunter BackSpace Wolf Plasma Front

With the completion of these two, the client has decided to go ahead and get his whole army painted.

I did have a rather random but cute commission come in. One of my wife’s co-workers wanted me to re-paint a Skylander. Her son wanted a girl Skylander to give to his sister.

SkylanderThis was the starting model. The kid wanted typical “girl” colors: pink and purple. Since it was for a 6-year-old, I didn’t go to crazy with painting it; however, bot the mom and kids did end up absolutely loving it.

Skylander Re-paintSkylander re-paint2Now for some of the personal stuff that have been distracting me. I continue to plod along with my ODST armor, but with most of it reinforced, I have actually begun putting it together.

ODST armorODST BracersSome of the other parts like the hip and thigh armor hang off a belt that I need to get. The helmet has been soaking up a lot of time though.

ODST Helmet

A nice metal undercoat that will help with weathering.

ODST WeatherODST Weather BackMasked off scratches with liquid rubber.

ODST Helmet GreenODST Helmet BrownThis is where things got tedious. I plan to do a digital camouflage scheme for my armor. That means lots and lots of stencils over four different colors.

There have been two big events that have distracted me though over the last couple of months.

DragonCon BadgeThis was the first. Our first trip to Dragon*Con.

DragonCon MarineThere were lots of pictures taken. 🙂

Last week I was busy working a haunted castle out in the middle of no where, so I guess that was fitting. I got to play a crazy and bloody doctor.

Mad DoctorFinally, the big reveal of what has caused me to not post much recently is that I’m moving into an actual studio.

StudioStudio 2We did some major home renovations recently, and along with that was convert a spare room into a studio. I soon hope to have it completely done and running. I no longer will be cramped into a small alcove, but have a whole room.

Anyway, that’s about everything that’s been going on recently. I should get back to posting regularly, so make sure to check back. As always, share, follow, comment, and all those other wonderful internet stuff.

Geek Out Studio Commission: Gambol Shroud Prop WIP

This is a slight deviation from the normal 40k topics that I ramble about, but I’m trying to diversify the blog and show off my commission service Geek Out Studio. Just in case I’ve forgotten or you’re new, Geek Out Studio is a commission service that offers services for miniature paint, prop construction, and costume making. I just started, and things are still a bit frayed. Juggling doing commission services and doing my own stuff, I’m finding things to be a bit strained. I recently finished my first commission: a Dark Eldar Wraithknight.

But enough with the pleasantries, let’s get to the main point of this post: Gambol Shroud.

Black.2

Give a bit of a back story for this commission, my wife and I met a Alice Infinity at Pensacon last year. She was cosplaying as Blake while my wife was cosplaying as Ruby. Long story short, we became friends, and I agreed to build her Gambol Shroud for the next time she wanted to do Blake. I started work on this prop last month. It’s been a challenge matching my schedule with that of the workshop that I get to use, so it’s taken my a lot longer to do than I like. This prop is not as difficult or big as my wife’s Crescent Rose, so when I can get to the shop, things progress quickly.

Gambol Shroud Plans

I started by printing off the plans for the sword and sheath. There are a number of people out there that have posted plans for Gambol Shroud, so you just need to look. This one is actually just a touch on the big side since the computer I printed it from didn’t format it. In the end, it will be barely noticable. Once the plans were printed and taped together, I cut everything out.

Sheath SliceGun Handle

The sheath and pistol part of the sword are going to be 1/2 inch EVA foam. This material is easy to work with, provides some rigidity, but is very light. The sword blade will be sandwiched between the two pistol pieces, and a piece of Masonite is sandwiched between the two pieces that make up the sheath.

SheathSheath Interior

I’ll need to router out the interior for the sword to go in. Once that is done, I’ll line the interior with some corse felt to prevent the sword from sliding out.

Alice's BladeExtra Blades

I actually had enough material to make three swords. Alice’s blade is made from 1/2 inch thick striated bamboo, and the other two are made from 1/2 inch poplar. Both are strong and light weight.

 

Blade EdgeThe swords are sanded down to a blade.

Really, the only thing left to do down is start putting things together. I’ll still need to cut the blade edge on the sheath, but since it’s foam, that shouldn’t be too much of a challenge. I’ll also embed a strip of sheet metal into the sheath. I plan to make Blake’s back unit that she uses to attach her sword to her back. The sheet metal will be used to attach to a magnet that I place in the back unit. Once everything is done, I’ll seal the foam and coat it with Smooth-On 65D. This will give the whole surface a smooth plastic shell.

Anyways, it was a quick and dirty post, but I’ll certainly post more as things get done.

 

Did I Fall Off the Planet?

Oh my lord! Almost a year with no new content. That has to be a sad state. The truth of the matter is that I’ve been busy behind the scenes with a variety of projects. Add on top of that the juggling act of having a job. I’ve been doing a lot of gaming over the past few months. Some of it not Warhammer 40k. I’ve been sucked into the world of Infinity, Song of Blades and Heros, Flames of War, and Full Thrust. There’s a local Infinity escalation league starting next month that I’m jumping in on, so I’ll try and be good and start adding more actual gaming content. There’s also the small fact that I’ve been getting a very big project up off the ground. What is that you ask?

Drum roll…

GOS-horiz-1in-300dpi

I’ve started a commissioning service that focuses on props, costumes, and miniatures. Right now you can check it out at Geek Out Studio’s Facebook page. It probably won’t be long until I get a proper web page for it along with Youtube channel. Naturally, content from this site will no doubt morph into including more content for Geek Out Studio.

I’ve been toying with the idea of a commissioning service for some time; however, it wasn’t until Pensacon that I decided to take the plunge. Most of my time over the winter was devoted to putting together my and my wife’s costume. Mine fell through and my wife’s costume almost did too. However, we managed to pull it off. Here she is in her RWBY cosplay as Ruby Rose.

Ruby RoseRuby Rose CosplayDuring the build of her costume I was getting a lot of praise from people, and when I showed them my miniatures, the praise just grew. Most of those comments were along the lines of I should do this professionally, or could I do something. I was also inspired when I ran into an old friend from high school. She was making a career of following her love and passion, so I figured I had no excuse.

Just my Warhammer peeps don’t feel like their being left out. Here is a small collection of my miniatures that recently won a handful of prizes at the Blue Angel’s Scale Model and Miniatures Expo. The pictures really are bad, and I’m in the process of making a light box. Just humor me and keep an eye out for better ones.

Dark Angels RhinoDark Angels SquadDeathwingRavenwing Storm TalonRavenwing Storm Talon topThese last minis aren’t Warhammer, but I think they’re easy to look at.

ShowgirlsI run a handful of these as my war band for Song of Blades and Heroes.

Anyway, I’ve got a lot of projects on my table, so I’ll have plenty to go over through the next few days. Thankfully, I’ve been moved to part time, so I can devote more time on working on Geek Out Studio and my blog. Right now though, I trying to organize and clean the chaos that is near and dear to all of us: my work area. As all ways, if you have questions or comments leave them down below.